Clicky

ZKL 6003 2RS C3 bearing

Back to product list

ZKL 6003 2RS C3 bearing

Reference: 6003.2RSC3_ZKL Manufacturer: ZKL
1.18 € / pcs With VAT: €1.43

Remaining stock

Kaunas, Raudondvario pl. 162a, LT-47174: 0 pcs
Klaipėda, Mainų g. 31, LT-94101: 0 pcs
Vilnius, Savanorių pr. 65A, LT-02300: 2025-03-12 <10 pcs
Panevėžys, J. Janonio g. 1, LT-35101: 0 pcs
Shipping: 1-4 w.d.
Supplier warehouse 1 0 pcs
Supplier warehouse 2 0 pcs
Shipping: 5-7 w.d.

Single-row groove ball bearings are the most common type of rolling bearings. Their use is very widespread. The raceway grooves on both the inner and outer rings have circular arcs of slightly lager radius than that of the balls. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highly suitable for applications where high speeds and low power loss are required.

In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common.

Brand ZKL
Item ID 13445
Barcode 2001344500049
NomNr 6003.2RSC3_ZKL
Net weight 0.0410
Gross weight 0.0480
Bearing bore type Cylindrical hole
Types of bearing separator Steel separator
Type of bearing seal Plastic
Bearing inner diameter D, mm 17
Bearing outer diameter D, mm 35
Bearing width, mm 10

Analogue products

2.23 € / vnt. With VAT: €2.70 Stock: >10 pcs.