- Manufacturer: IPL
Stock: 0
Dagmita supplies water delivery and suction hoses for industrial pumping systems, construction sites, agricultural irrigation, firefighting applications, drainage operations and wastewater handling. Depending on the working conditions, hoses may be pressure-type (for water supply) or vacuum-type (for suction and removal). Materials include PVC, rubber (NBR/EPDM), PU (polyurethane) and spiral reinforcement using PVC or steel wire to prevent collapse under vacuum loads.
Correct hose selection is determined by operating pressure, flow capacity, abrasive particle concentration, temperature, pump configuration and bending geometry. Dagmita provides technical consultation, helping to choose the proper internal diameter, wall thickness, vacuum resistance and pressure rating for continuous or intermittent operation.
We ensure stock availability and fast delivery, as well as hose assembly with camlock, fire coupling, threaded fittings, clamps and quick-connect couplings.
Water hoses are used for fluid transfer and hydraulic movement in industrial and agricultural environments. The primary distinction between hose types lies in whether the system works under positive pressure (pushing) or negative pressure (suction, pulling).
Pressure Hoses (Water Delivery)
Pressure hoses are used to supply water through pipelines, irrigation systems and pumping networks.
Characteristics:
-
Reinforced with textile or steel braid layers
-
Designed to withstand internal pressure without deformation
-
Suitable for clean water or minimally contaminated media
Applications:
-
Irrigation in agriculture
-
Industrial washing and rinse systems
-
Water distribution for process lines
Suction Hoses (Vacuum Operation)
Suction hoses must resist collapse under negative pressure, especially when connected to pumps.
They feature:
-
Spiral reinforcement (PVC or steel wire helix)
-
Stable cross-section under bending
-
Compatibility with water containing sand, mud, or sediment
Used in:
-
Drainage, slurry pumping, wastewater removal
-
Construction & emergency dewatering systems
-
Tank emptying and portable pumping units
Material Comparison
| Material | Characteristics | Typical Use |
|---|---|---|
| PVC | Lightweight, flexible, economical | General water transfer, irrigation |
| Rubber (EPDM/NBR) | High pressure resistance, temperature tolerant | Industrial water supply, pumping lines |
| PU | Highly abrasion-resistant | Water with sand, silt, sludge, slurry |
| Helix Reinforced | Maintains shape under vacuum | Suction hoses for pumps and tank emptying |
Selection Criteria
When selecting a hose, evaluate:
-
Operating pressure / vacuum requirements
-
Internal diameter to maintain correct flow rate
-
Bending radius to match installation layout
-
Temperature exposure
-
Abrasive media concentration
Incorrect hose selection can cause:
-
Pressure losses
-
Hose collapse or fracture
-
Premature wear and replacement
-
Increased pumping energy consumption
Applications
-
Pump stations and fluid transfer systems
-
Construction and excavation sites
-
Irrigation and agricultural water distribution
-
Firefighting and emergency water supply
-
Reservoir, tank and pit emptying operations
Dagmita Provides
-
Technical selection based on flow, pressure, and operating regime
-
Hose assembly with couplings and clamps
-
Reliable stock availability and fast delivery across Lithuania